Cable-Laying Vessel VEGA

Cable-Laying Vessel VEGA

Cable-Laying Vessel VEGA

Cable-Laying Vessel VEGA

The vessel is a cable laying vessel equipped with the DP system, an ROV, and a cable laying support system. The vessel can be used for submarine cable laying works, repair works, or cable burying works in a way to complement a large vessel.

CARBIS-II ROV system
CARBIS-II ROV system

Port of registration

Batangas, the Philippines

Overall length

74.25 m

Width

12.5 m

Maximum deadweight draft

4.6 m

Gross tonnage

1,706 tons

Cruising speed

13.5 knots (Maximum 15.4 knots)

Maximum range

Approx. 4,500 nautical miles

Propellers/generators

Main propellers:

CPP×2

Bow thrusters:

500HP×1

Main generators:

625kVAX450V×2 300kVAX450V×2

Cable handling equipment

Drum-type cable engine (diameter: 3 m) x 2
Six dual-tire linear cable engine x 1
Bow sheave (diameter: 2.5 m) x 3
(including flat sheave x 1)
Aft Sheave (diameter: 2.5 m) x 3 (including flat sheave x 1)

Cable tank capacity

169 m3

ROV

 

Loaded on stern

Maximum diving depth

2,500 m

Dry weight

8 t

Length

3.5 m

Width

2.1 m

Height

3.2 m

On-board equipment

Cable sensor (Innovatum)
Underwater camera
Fore monitoring sonar manipulator
Jetter (water jet) for burying

Dynamic positioning system

SIMRAD SDP 21
(Electronically controlled navigation system,
Set-point fixation, etc.)

Navigational instruments

Radar, Gyro Compass, GPS (DGPS).For shallow water, depth measurement device for deep waters.

Communications equipment

Satellite communication system, V/UHF wireless GMDSS (MF/HF, VHF), fax etc.

On-deck equipment

A-frame crane, 5-ton crane x 2, winch etc.

Accommodation

for 50 people
(Crew and client representatives)

Please contact us for consultations and document request.

Contact Us